How to Wire Solar Panels in Series

Affiliate Disclaimer: As an Amazon Associate, EXPLORIST.life earns from qualifying purchases..

There are three ways to wire a solar panel array; series, parallel, and series-parallel. This blog post is not going to cover when to use which one, but this blog post will show you, once you’ve made that decision, how to wire your solar panels in a series array.

Wiring solar panels in series simply means that you are going to connect the positive wire from one solar panel to the neighboring solar panel. The remaining positive and negative wires on the ends of the array will then be connected to the charge controller.

Here is a video that will guide you through this process and below the video, I have several examples of how to wire two to six solar panels in series.

How to Wire Solar Panels in Series Video

How to Wire Two Solar Panels in Series

How to Wire Three Solar Panels in Series

How to Wire Four Solar Panels in Series

How to Wire Five Solar Panels in Series

How to Wire Six Solar Panels in Series

5 thoughts on “How to Wire Solar Panels in Series”

      1. Is it possible to wire the panel array in series (2 panels) 24V and leave the batteries in parallel 12V? Would the charge controller lower the voltage from array going to the batteries?

  1. It would be nice if you would just let me know what charge controller and inverter I need for the 3 Renogy 300 watt 24 volt solar panels I purchased. Actually got 6 300 watt panels for 2 different locations. I am lost here. I have electrician in family that can hook up, but that looks like the simple part. I filled out solar charger calculator but am not sure. RNG-300D-G1 solar panels. I purchased from Home Depot.

Leave a Reply to Nate Yarbrough Cancel Reply

Your email address will not be published. Required fields are marked *